Answer summary
In short: a workshop supply list is not a shopping list of everything a maker might want. It is the shortest possible set of jewelry making tools and supplies that lets every student in the room finish a wearable piece during the session. That means cord that arrives ready for threading, clasps that close without a fight, and quantities calculated per head rather than per year.
On this page
- Who attends a beading workshop and what they expect to take home
- Which GRIFFIN cords to stock for teaching and which sizes to choose
- Which clasps and findings a beginner can actually use
- The tool kit each student needs, and what the room can share
- How much cord and how many findings to buy per session
- Scaling the stock list up for a multi-day course
Who attends a beading workshop and what they expect to take home
Four types of people sign up and they need different things from the same table.
There is the complete beginner, usually brought along by a friend, who has never held a beading needle and will judge the whole craft by whether the piece survives the drive home. There is the returning maker who already strings at home and came for one specific skill, most often knotting between beads. There is the gift-maker working to a deadline, who has a recipient and a date in mind before they have a design. And there is the occasional pro-amateur who signed up mainly to handle a material before committing to it.
What unites them is the expectation that they will leave with something finished and wearable. That single expectation should drive every purchasing decision. A room with forty cord colours and no spare clasps produces frustrated students; a room with three colours and a deep stock of findings produces finished necklaces. When in doubt, buy depth over variety.
The second thing to plan for is time. A two-hour class realistically gives each student around ninety minutes of hands-on work once the demonstration and the tidying are subtracted. Any supply that adds a preparatory step, such as threading a loose needle, eats directly into that window.
Which GRIFFIN cords to stock for teaching and which sizes to choose
The most useful distinction for an instructor is between Carded Bead Cord and Bead Cord on spools.
Carded Bead Cord includes GRIFFIN 100% Natural Silk, NylonPower, and High Performance. All three cords are triple twisted, do not fray, and come with a stainless-steel beading needle attached, at two metres of cord per card. Cord on spools, such as Jewelry Nylon and Braided Nylon Cord, is twisted once, has no built-in fray protection, and needs a separate needle, which also means the effective diameter doubles where the cord is doubled back. For a short class, the carded format removes an entire teaching step.
GRIFFIN 100% Natural Silk is what most students picture when they imagine a knotted necklace. It is Triple Twisted with a Needle Attached, and GRIFFIN positions it as The Best of the Best under the banner Mastery since 1866. Professional pearl knotters have reached for it since that year. It comes in 13 thread sizes, from No. 0 at 0.30 mm to No. 16 at 1.05 mm. Stock the middle of that range rather than the extremes:
- 0.35 mm to 0.50 mm for small pearls, glass beads, and smaller wooden or natural stone beads
- 0.60 mm to 0.80 mm for mid-sized pearls, glass beads, and natural-stone beads
- 0.90 mm to 1.05 mm for large or heavy beads with irregular drill holes
Three sizes across that span will cover almost any bead a student brings to a general class.
Keep a second line alongside it. NylonPower is the vegan alternative to silk, stretches only about 3 to 4 per cent under tension, and returns to its original length when released, which makes it forgiving in inexperienced hands. High Performance is the one to reach for when the class is working with hard gemstones such as rock crystal or amethyst; it comes in white only, and in 10 sizes from No. 0 to No. 10, and is made from fibres that are 15 times stronger than steel.
For a first-session confidence builder, GRIFFIN Jewelry Elastic Cord is hard to beat. It is a TPU cord rated to 200 per cent stretch in three diameters. The 0.7 mm diameter is available in transparent only; the 0.5 mm and 1.0 mm diameter are available in transparent, ruby, blue, lilac, green, and black. Pair it with GRIFFIN Superglue on the knot.
Which clasps and findings a beginner can actually use
Clasp choice is where beginner workshops quietly succeed or fail. GRIFFIN clasps and findings are made of 925 sterling silver, are nickel-free, and are available with 7-micron 24K gold plating where applicable, so the mechanical decision is really about dexterity.
Magnetic Ball Clasps are the most beginner-friendly option in the range, with sizes of 8, 10, 12, and 15 mm. They close themselves, which matters for students with limited hand strength or reduced fine motor control. S-Hook Clasps, available in 12.0, 20.0, and 30.0 mm sizes, are the next easiest and give a more traditional look. Lobster Clasps and Spring Rings suit students who want a conventional finish and have the dexterity for a spring-loaded lever; Spring Rings are 925 sterling silver with optional 24K gold plating.
For finishing the knot at each end, stock Squeeze Capsules and Bell Caps. The 4.0 mm Squeeze Capsule with a threading hole is designed for direct cord connection. Bell Caps are available with an open eye in 3, 4, 5, and 6 mm sizes, and with a large soldered eye in 3, 4, 5, 6, and 8 mm sizes. Add Open Jump Rings from 3.0 mm to 5.9 mm to link the two together.
If the session covers wire rather than cord, note that Crimp Beads and Crimp Tubes are different products. Crimp Beads come in two sizes; Crimp Tubes come in three sizes. Buying one when the lesson plan calls for the other is a common and irritating mistake.
One practical rule: pick a single metal for the whole class. Mixed silver and gold-plated findings on one piece can create an inconsistent look to anyone who knows jewellery, and a beginner will not spot it until they get home.
The tool kit each student needs, and what the room can share
Two lists, not one. Work out what sits in front of each student first, then decide what can live in the middle of the table.
Per student, the list is short: cord, a clasp, two finishing components, and a small pair of flat nose pliers. Sharp scissors can be shared between pairs. Because Carded Bead Cord ships with the needle attached, a general beading class needs far fewer loose tools than instructors usually assume.
Shared across the room, stock GRIFFIN Beading Needles for any work with cord on spools. They come in fine at 0.24 mm, medium at 0.36 mm, and heavy at 0.50 mm, in bags of 25, which is roughly the right unit for a term of classes rather than a single session. A grey-flocked Bead Board keeps designs in order while students plan a layout, and comes in two sizes, up to 97 cm for 3-strand chains and up to 50 cm for 4-strand chains.
Keep two adhesives on the bench. GRIFFIN Bead Cord Glue is a special glue for twines, threads and felt; it stays flexible after drying and is free of softeners and solvents. GRIFFIN Superglue is the recommended choice for GRIFFIN Jewelry Elastic Cord. Both come in 10 g bottles with three dosing tips, so one of each will serve a whole room.
A bead reamer is worth having in the shared kit as well. Sharp-edged drill holes are the usual cause of a thread breakage mid-session, and smoothing the hole solves it faster than restringing does.
How much cord and how many findings to buy per session
Work out consumables per head, then add a buffer.
Each card holds two metres of cord. Knotting between beads consumes noticeably more cord than the finished length suggests, so plan one card per student for a bracelet and two cards per student for a knotted necklace between 43 cm to 48 cm long. Cards are sold in packs of 5 and 10, which is suitable for a class of ten with a spare set in reserve.
For findings, budget one clasp and two finishing components per student, one spare set for every four students. Beginners drop things, and a lost Bell Cap should not prevent someone from fishing their piece. Glue, needles, and boards are reusable supplies rather than consumables; buy them once and account for them separately.
Add roughly 15 per cent to the cord figure for breakage and reworking in a beginner class. That percentage falls sharply in intermediate sessions, so keep separate figures for the two levels rather than one blended number.
In terms of cost, the GRIFFIN store publishes a single transparent price list with automatic discount tiers applied by turnover and order value, the cost of a term of workshops easier to forecast than a series of one-off purchases.
Scaling the stock list up for a multi-day course
A multi-day course needs a different stock logic, because students carry skills from one session to the next.
A workable three-day progression runs from an elastic cord bracelet on day one to a knotted necklace on 100% Natural Silk or NylonPower on day two, to crimped wire work on day three. Each day introduces one new closure type and one new material family, so purchasing follows the syllabus rather than the catalogue.
Standardise carefully. One metal, two cord families, three diameters, and two clasp types will carry a full course. Every additional variable multiplies both the stock holding and the number of questions you field mid-demonstration.
For gift-focused or holiday sessions, a curated jewellery-making kit removes the sourcing problem entirely. GRIFFIN Material Kits pair a gemstone strand with matching cord, findings, and glue, and each comes with a short video, which is useful when students want to repeat the project at home.
Frequently asked questions
How far ahead should supplies be ordered for a scheduled class?
Allow enough lead time to check the delivery against the syllabus and reorder anything missing before the first session, rather than the day before. GRIFFIN offers worldwide delivery through griffin1866store.com, and authorised stockists can often cover a last-minute gap locally.
What should students be told about looking after the piece they take home?
Never use cleaning agents on jewellery. Store pieces separately and keep them dry, so they do not rub against each other, and wipe them gently with a soft, dry cloth. Pearls in particular benefit from a wipe after wearing.
Can leftover cord from one workshop be used in the next?
Yes. If the cord retains the bends from being wound around the card, moisten it with water and stretch it vigorously; the bend disappear once it dries.
What lengths should be planned for the finished pieces?
For adults, bracelets are about 17.5 cm to 19 cm for women and 20.5 cm to 28 cm for men. A standard necklace is 35 cm to 40 cm long, and the Princess-length necklace is 43 cm to 48 cm long and sits just under the collarbone, making it suitable for a pendant. Children’s bracelets run about 14 cm to 16.5 cm.
Where should students buy their own supplies after the class?
Point them to griffin1866store.com and to authorised GRIFFIN stockists worldwide. Regular buyers benefit from the published discount tiers, which are worth mentioning to anyone planning to continue making jewellery.
Is a beginner class better served by silk or by nylon?
Both work. Silk gives the classic drape and knot quality that students associate with pearl necklaces. NylonPower is the vegan option and is more tolerant of uneven tension from an inexperienced maker. Many instructors use nylon for the first session and the second on silk.
1 thought on “The Jewellery Workshop Instructor’s Supply Checklist: What to Stock Before Day One”
Comments are closed.